星期五, 18 09月 2020 15:15

Cypress’ 32-bit Arm® Cortex®-M4 Cortex-M0+ PSoC® 6

PSoC® 6 bridges the gap between expensive, power hungry application processors and low performance microcontrollers (MCUs). The ultra low power PSoC 6 MCU architecture offers the processing performance needed by IoT devices, eliminating the tradeoffs between power and performance. The PSoC 6 MCU contains a dual CPU architecture, with both CPUs on a single chip. It has an Arm® Cortex® M4 for high performance tasks, and an Arm Cortex M0+ for low-power tasks. With security built-in, your IoT system is protected.


Single or Dual Arm® Cortex®-M4F and Arm® Cortex®-M0+ CPUs

Whether you only need an ultra low-power programmable solution or high-performance, secure, dual-CPU programmability, the PSoC 6 family can support your needs. The 150-MHz Arm® Cortex®-M4F CPU has single-cycle multiply with floating point and a memory protection unit (MPU) while the 100-MHz Arm® Cortex®-M0+ CPU has single-cycle multiply and an MPU. The CPUs are designed for battery and other low-power applications allowing you to select a 1.1V or 0.9V operation voltage. The flash memory has two caches, one for each CPU.  There are up to three DMA controllers with up to 16 channels each.

Bluetooth Low Energy (Bluetooth Smart)

Members of the PSoC 63 and PSoC 64 lines with Bluetooth Low Energy radios on chip comply to the Bluetooth 5.0 specification. They have a 2.4 GHz RF transceiver with a 50 Ω antenna drive. The Link Layer supports four simultaneous connections with 2 Mbps LE data rate....

继续阅读完整内容

请查看下方广告以解锁文章剩余内容

广告加载中...
查看 20702
 
Please support our site by viewing this advertisement.

Please support our site by viewing this advertisement

Free Content